Select a product: |
beyerdynamic offers a varied range of microphones for all applications: gooseneck, acoustical boundary, handheld or desktop microphones, the range covers all situations in which microphones are implemented. |
Ceiling Mount Microphones
SHM22F Ceiling Mount Microphone
This high quality ceiling mount microphone is supplied with an in-built pre-amp board.
| Transducer type | Condenser (back electret) |
| Pressure gradient | Operating principle |
| Frequency response | 65 - 20,000 Hz |
| Polar pattern | Cardioid |
| Open circuit voltage at 1 kHz (0dB = 1V/Pa) | 15 mV/Pa-36.5 dBV |
| Nominal impedance | 200 W |
| Load impedance | > 1000 W |
| Max. SPL at 1 kHz | 124 dB |
| S/N ratio rel. to 1 Pa | 60 dB |
| A-weighted equivalent SPL | approx. 26 dB |
| Power supply | 8 - 52 V phantom power |
| Current consumption | approx. 3.4 mA |
| Connector | 3-pin terminal |
| Length | (L x W) 81 x 81 mm |
SHM22H Ceiling Mount Microphones
This high quality ceiling mount microphone is supplied with an in-built pre-amp board. Gooseneck length is 135mm, Head Shaft: 11mm and weight: 160g. The unit is supplied with 8m of cable and technical specifications are as per the SHM22F.
SHM22FWS
Designed for conference table mounting, interviewing rooms and stage pick up, the SHM 22 FWS is perfect for anywhere you want a microphone to be inconspicuous.
- Cardioid polar pattern
- High gain-before-feedback
- Flat, wide range frequency response
- High-quality reproduction of speech and music
- Flexible gooseneck
- Unobtrusive design
- For fixed mounting
Gooseneck Microphones
Excellence in Intelligibility
The SHM200 Series are available in many different lengths and offer the
following features:
- High gain before feedback
- Available with ON/OFF switch
- Phantom power 11-52 volts
- Side exit cable version available
- Non-glare surface
- Optional ZSH20 Shock Mount
SHM203A
Condenser gooseneck microphone, length 300 mm, with XLR male.
SHM204A
Condenser gooseneck microphone, length 400 mm, with rigid tube, with XLR male. Also available with switch (SHM204 AS).
SHM205A
Condenser gooseneck microphone, length 500 mm, with rigid tube, with XLR male. Also available with switch (SHM205 AS).
SHM204XD
Slimline gooseneck microphone for applications where a high quality, yet unobtrusive, gooseneck microphone is required. The unit has a compact head with a 3mm carbon tube. Electret condensor cardioid capsule, 400mm length with XLR base.
SHM215A
Condenser gooseneck microphone, length 500 mm, with rigid tube, with XLR male and illuminated ring.
NEW SHM930
Condenser gooseneck microphone (shotgun, back electret), length 400 mm, XLR male, with illuminated ring, and WS 88 windscreen.
SHM200 Series Specifications
| Transducer type | Condenser (back electret) |
| Pressure gradient | Operating principle |
| Frequency response | 50 - 19,000 Hz |
| Polar pattern | Cardioid |
| Open circuit voltage at 1 kHz (0dB = 1V/Pa) | 10 mV/Pa/12mV/Pa (SHM 214 I/215 I |
| Nominal impedance | < 200 W |
| Load impedance | ≥ 1 k W |
| Max. SPL at 1 kHz | 123 dB |
| S/N ratio rel. to 1 Pa | 60 dB |
| A-weighted equivalent SPL | 26 dB |
| Power supply | 11 - 52 V phantom power |
| Current consumption | approx. 3.5 mA |
| Head diameter | with pop shield: 26mm, without: 13.5 |
Microphones
Opus 29S
- Supercardioid polar pattern
- Flat, wide range frequency response for uncoloured sound reproduction
- Rugged construction
- Excellent system isolation
- With On/Off switch
- Supplied with microphone clamp, XLR-XLR cable (5m) and zipper bag
| Transducer type | Dynamic |
| Operating principle | Pressure gradient |
| Frequency response (close miking) | 50 - 16,000 Hz |
| Frequency response (distant miking) | 100 - 14,000 Hz (measured at 1metre) |
| Polar pattern | Supercardioid |
| Nominal impedance | 600 ohms |
Opus 39S
- Supercardioid polar pattern
- Excellent isolation from unwanted sound
- Flat, wide range frequency response for uncoloured sound reproduction
- Rugged construction
- Available with on/off switch (OPUS39S)
| Transducer type | Dynamic |
| Operating principle | Pressure gradient |
| Frequency response (close miking) | 50 - 16,000 Hz |
| Frequency response (distant miking) | 100 - 14,000 Hz (measured at 1metre) |
| Polar pattern | Supercardioid |
| Nominal impedance | 600 ohms |
Opus 81S
- Cardioid polar pattern
- Built-in footfall filter
- Excellent volume before feedback and off-axis rejection
- Internal shock mount reduces handling noise and vibration
- Rugged construction
- 12-48 V phantom powering
| Transducer type | Condenser (black electret) |
| Operating principle | Pressure gradient |
| Frequency response | 50 - 18,000 Hz |
| Polar pattern | Cardioid |
| Open circuit voltage at 1 kHz (0dB = 1V/Pa) | 3.2 mV/Pa = -50 dBV |
| Nominal impedance | 190 ohms |
Opus 69S
- Supercardioid polar pattern
- Excellent isolation from unwanted sound
- Flat, wide range frequency response for uncoloured sound reproduction
- Rugged construction
- Structure borne noise attenuation
| Transducer type | Dynamic |
| Operating principle | Pressure gradient |
| Frequency response (close miking) | 35 - 16,000 Hz |
| Frequency response (distant miking) | 95 - 14,000 Hz (measured at 1metre) |
| Polar pattern | Supercardioid |
| Nominal impedance | 290 ohms |
TGX 47
- Ideal for snare drums
- Supercardoid polar pattern
- High gain before feedback
- Rugged metal construction
- Instrument Microphone also available
| Transducer type | Dynamic |
| Operating principle | Pressure gradient |
| Frequency response | 50 - 15,000 Hz |
| Polar pattern | Supercardioid |
| Open circuit voltage at 1 kHz | 2 mV/Pa ± 1.5 dB |
| Nominal impedance | 600 ohms |
TGX 48
- Professional vocal microphone
- Supercardioid polar pattern
- Integrated pop shield reduces “pop” noise associated with close vocal miking
- High gain-before-feedback
- Barrel coated with special soft lacquer
- Optimal handling
- Rugged metal housing
| Transducer type | Dynamic |
| Operating principle | Pressure gradient |
| Frequency response | 50 - 15,000 Hz |
| Polar pattern | Supercardioid |
| Open circuit voltage at 1 kHz | 2 mV/Pa ± 1.5 dB |
| Nominal impedance | 600 ohms |
TGX 58
- Supercardioid polar pattern
- High gain before feedback
- Barrel coated with special soft lacquer
- Locking ON/OFF switch
| Transducer type | Dynamic |
| Operating principle | Pressure gradient |
| Frequency response | 50 - 15,000 Hz |
| Polar pattern | Supercardioid |
| Nominal impedance | 600 ohms |
M69TG
- Hypercardioid polar pattern
- Wide range frequency response
- Excellent sensitivity
- Low feedback
| Transducer type | Dynamic |
| Operating principle | Pressure gradient |
| Frequency response | 50 - 16,000 Hz |
| Polar pattern | Hypercardioid |
| Side attenuation | 23 dB at 120° |
| Nominal impedance | 200 ohms |
M88TG
- Hypercardioid polar pattern
- Sensitive, accurate response
- Extended frequency range with rising high end and exceptional bass reproduction
- Integral -20 dB humbucking filter
| Transducer type | Dynamic |
| Operating principle | Pressure gradient |
| Frequency response | 30 - 20,000 Hz |
| Polar pattern | Hypercardioid |
| Side attenuation | > 23 dB at 120° |
| Nominal impedance | 200 ohms |
Call (08) 8346 4444 for more information or click here to enquire.