Rane RPM 2m

Item Code: RPM 2m

Product Number: RPM 2m

The RPM 2m is a 100% drag and drop configurable DSP based device, set up and controlled using Rane's Drag Net software. Industry standard 10Base-T Ethernet is used to communicate between Drag Net devices and any Ethernet equipped PC running Microsoft Windows.

The RPM 2m provides two balanced, mic/line level analogue inputs and two balanced analogue outputs, each I/O having its own 100% user-defined signal processing path. An AES3 digital output is included, bringing the total number of outputs to four.

Cost-effective end user control is possible using optional Rane accessories in conjunction with the Versatile Input Port. Whether your application requires contact closure preset recall or remote level control using a potentiometer on a wall, the RPM 2m keeps the user interface easy and inexpensive.

Euroblock and XLR connectors are provided for audio input/output. Grounding screws for direct connection to the metal chassis are provided for solving EMI problems due to shield wiring. Also found on the rear panel is an RJ-45 Ethernet connector for computer control, and an IEC AC power input.

All DSP algorithms are not created equally and textbook DSP algorithms miss the mark where the rubber meets the road. Rane's team of audio-savvy DSP mathematicians - a rare breed itself - in conjunction with our industry-leading analogue signal processing gurus have combined forces to offer superlative digital and analogue audio performance. With 24-bit converters, greater than 105 dB throughput dynamic range and double precision 48-bit internal DSP 'math,' the RPM 2m offers the best DSP algorithms and audio performance available.

This ain't no Internet appliance! For example, the RPM's 215 MIPs translate into 150 fully parametric EQ filters, should you need multiple channels of 15 band parametrics and nothing else.

Multiple units are controlled from a single computer using low-cost Ethernet switches. The recessed Default button on the rear panel recalls Preset 1 in case of communications failure. The front panel has tri-colour LED meters for each input and output, allowing fast and intuitive signal flow verification without a computer. Current Preset, Control Port, Power, Ethernet and Status indicators are also on the front panel. Powered from an internal power supply and certified as UL, CSA and CE complaint, the RPM 2m is compatible with any installation mandating agency compliance.

Downloads

RPM2M-Brochure

RPM2M-Manual

Hardware Features

  • 2 balanced analogue Inputs and Outputs
  • AES3 Output
  • Microphone preamp with 48V Phantom Power
  • Powerful DSP, up to 48-bit precision processing
  • 108 dB dynamic range
  • Preset recall via contact closures
  • Versatile Input Port for remote control via voltage
  • 10Base-T Ethernet control
  • UL/CSA/CE internal power supply (100-240 VAC)

Software Features

  • Drag Net™ setup & control software for Windows®
  • Signal flow and critical settings in plain view on one screen
  • 24 Fully programmable processing configurations
  • Expandable collection of processing blocks
  • Firmware upgrades via Ethernet connection
  • Download Drag Net now at www.rane.com/dragnet
Just letting you know that the microphone has been FANTASTIC - I could actually speak when I got home last night !!!!

Deb Featherby
Bookmark SiteTell a FriendPrint