Mipro Microphones and Antenna Accessories
Item Code: Mipro Microphones and Antenna
Mipro lapel, earworn and headworn microphones are compatible with all current Mipro beltpacks,
and can also be used with non-wireless systems when linked with the MJ53.
|MU53S||Uni-directional lapel microphone with clip, available in black.|
|MU55L and||Sub-miniature omnidirectional lapel microphone available in black (MU55L) and beige|
|MU55LS||(MU55LS). The compact, water-resistant design means it can be washed under a tap after use.|
Single sided, omnidirectional earworn microphone.|
Supplied with three sizes of ear-hooks, and available in beige.
Omnidirectional headworn microphone. Supplied with three|
sizes of headband, and available in beige.
Cardioid headworn microphone. Supplied with three sizes|
of headband, and available in beige.
|MU53H||Cardioid headworn microphone, available in black.|
Sub-miniature omnidirectional headworn microphone, available in black|
(MU55HN) and beige (MU55HNS). The lightweight, water-resistant design
enables it to be washed under a tap after use.
Adaptor that enables high impedance Mipro lapel, earworn and headworn|
microphones to connect to a conventional low impedance XLR input on a mixer
or PA system (XLR input needs to provide 12V-48 VDC phantom power).
MD101 with MM202/MM202A
The MD101 is a base that holds a Mipro beltpack transmitter. Add a MM202 (470mm) or MM202A (130mm) unidirectional gooseneck mic to create a wireless presentation microphone for boardrooms, lecterns, etc.
The ACT20T is a headworn transmitter, designed to sit on the headband of the MU23 headworn mic (supplied with ACT20T). No cable and no beltpack is now a reality for presenters and performers. Works with all ACT receivers, and includes a lithium battery and charger.
The AT90W is waterproof and ideal for both indoor and outdoor applications. Optional MS90
Aerobics style neoprene pouch, suited to all Mipro beltpack transmitters.
Mic clip, suitable for all Mipro handheld microphones.
AT70W Bi-functional omni-directional antenna for receiving and transmitting. Operates over
480MHz-1GHz. Includes ‘TX’ and ‘RX’ input connectors. The ‘RX’ connector includes a 12dB
high gain booster for cable loss compensation. The AT70W is waterproof and ideal for both indoor and outdoor. Optional MS90 wall bracket.
AD12 Passive Antenna Divider/Combiner
Can either divide an RF signal into two signal outputs or combine two signals into one signal
output (for distributed antenna applications).
For PC control of the ACT707 and ACT7a systems. Real time monitoring and control of up to 64 receiver modules simultaneously from up to 300 metres away. Includes built-in high performance spectrum analyzer for direct setup of non-interference frequencies and monitors the wireless environment for all operating channels and interference potential. The software is also capable of monitoring transmitter battery status, AF/RF and Antenna A/B strength.
Bi-functional log antenna for receiving and transmitting. Operates over 480MHz to 1GHz.
Includes ‘TX’ and ‘RX’ input connectors. ‘RX’ connector includes a 12dB high gain booster
for cable loss compensation.
AD707a Wideband 4-Channel Antenna Divider
Optimised for 470-800MHz, a single AD707a supports up to four UHF diversity receivers from
just a pair of antennas – greatly reducing the clutter of antenna installations and increasing
their receiving range and efficiency.